Chrysler 1997 Stratus Convertible RHD Service Manual page 131

PARK BRAKE SUPPORT PLATE BRAKE SUPPORT PLATE TRAILING BRAKE SHOE LEADING BRAKE SHOE AUTOMATIC ADJUSTER HOLD DOWN SPRING BRAKE ATTACHING PIN ACTUATING LEVER
JX
REMOVAL AND INSTALLATION (Continued)
(7) Remove the hold down spring and attaching
pin (Fig. 63) from the leading brake shoe.
Fig. 63 Hold Down Spring And Pin
(8) Remove the leading brake shoe from the brake
support plate.
(9) Remove the automatic adjuster (Fig. 64) from
the trailing brake shoe and park brake actuating
lever.
Fig. 64 Automatic Adjuster
(10) Remove the retaining clip (Fig. 65) holding
the park brake actuating lever to the trailing brake
shoe .
(11) Remove the hold down spring and attaching
pin (Fig. 66) from the trailing brake shoe.
(12) Remove the trailing brake shoe from the
brake support plate and the park brake actuating
lever (Fig. 67).
CLEANING AND INSPECTION
Clean metal portion of brake shoes. Check to see if
shoes are bent.
PARK PARK BRAKE LEVER PIN BRAKE SUPPORT PLATE BRAKE SUPPORT PLATE TRAILING BRAKE SHOE TRAILING BRAKE SHOE TRAILING BRAKE SHOE HOLD DOWN SPRING BRAKE PARK BRAKE LEVER RETAINING CLIP ATTACHING PIN WAVE WASHER SCREWDRIVER ACTUATING LEVER
Fig. 65 Park Brake Lever Retaining Clip
Fig. 66 Hold Down Spring And Pin
Fig. 67 Remove /Install Trailing Brake Shoe
Brake shoe lining should show contact across its
entire width and from the heel to the toe of the lin-
ing, otherwise replace.
BRAKES 5 - 29