Chrysler 1997 Stratus Convertible RHD Service Manual page 352

FLOOR BACKUP AND SIDEMARKER TAIL, STOP, TURN SIGNAL, CONSOLE FLOOR CONSOLE WIRE HARNESS TESY LAMP VIEW A VIEW A COUR- LAMP
8L - 14 LAMPS
REMOVAL AND INSTALLATION (Continued)
Fig. 5 Floor Console Courtesy Lamp
LIGHTED PRNDL LETTER BEZEL
REMOVAL
(1) Remove floor console. Refer to Group 23, Body,
for proper procedure.
(2) Disengage wire harness connector on bottom-
side of floor console.
(3) Disengage inverter for lighted PRNDL letter
bezel from shifter cover.
(4) Pull bezel downward through access hole in
floor console.
(5) Separate lighted PRNDL letter bezel from vehi-
cle.
INSTALLATION
(1) Position lighted PRNDL letter bezel to vehicle.
Fig. 4 Tail/Stop, Turn Signal, Backup and Side Marker Lamp
FLOOR CONSOLE FLOOR CONSOLE TESY LAMP COUR- BULB
Fig. 6 Floor Console Courtesy Lamp Bulb
(2) Push bezel upward through access hole in floor
console.
(3) Engage inverter for lighted PRNDL letter bezel
to shifter cover.
(4) Engage wire harness connector on bottom-side
of floor console.
(5) Install floor console. Refer to Group 23, Body,
for proper procedure.
DOOR COURTESY LAMP
REMOVAL
(1) Using a small, flat bladed tool inserted into
rear edge of door courtesy lamp lens, remove lens
(Fig. 7).
JX