Chrysler 1997 Stratus Convertible RHD Service Manual page 349

JX
REMOVAL AND INSTALLATION (Continued)
(3) Remove plastic nuts holding tail lamp to rear
closure panel.
(4) Separate lamp from opening in quarter panel.
(5) Rotate socket counterclockwise one quarter
turn.
(6) Pull socket from back of lamp.
(7) Pull bulb from socket.
INSTALLATION
(1) Push bulb into socket.
(2) Push socket into back of lamp.
(3) Rotate socket clockwise one quarter turn.
(4) Position tail lamp to opening in quarter panel.
(5) Install plastic nuts holding tail lamp to rear
closure panel.
(6) Install trunk lining.
CENTER HIGH MOUNTED STOP LAMP (CHMSL)
BULB
The center high mounted stop lamp (CHMSL) has
no serviceable bulb. If the lamp does not function
properly, the CHMSL assembly must be replaced.
LICENSE PLATE LAMP BULB
REMOVAL
(1) Remove screws holding license plate lamp to
rear bumper fascia.
(2) Separate license plate lamp from rear fascia.
(3) Rotate socket counterclockwise one quarter
turn.
(4) Pull socket from back of lamp (Fig. 8).
(5) Pull bulb from socket.
Fig. 8 License Plate Lamp Bulb
INSTALLATION
(1) Push bulb into socket.
(2) Push socket into back of lamp.
(3) Rotate socket clockwise one quarter turn.
(4) Position license plate lamp to rear fascia.
(5) Install screws holding license plate lamp to
rear bumper fascia.
LAMPS 8L - 11