Chrysler 1997 Stratus Convertible RHD Service Manual page 842

11 - 12 EXHAUST SYSTEM AND INTAKE MANIFOLD
REMOVAL AND INSTALLATION (Continued)
THROTTLE BODY BRACKET SUPPORT BOLT POSITION THROTTLE SENSOR
Fig. 21 Air Inlet Resonator
Fig. 22 Intake Manifold Sensors and Left Manifold
Support Bolt
Fig. 23 Throttle Position Sensor
(12) Slide Speed control cable out of bracket, if
equipped (Fig. 25).
MAP SENSOR PERATURE INTAKE AIR
SPEED CONTROL CABLE
SEN- TEM- SOR
EGR
Fig. 24 Idle Air Control Motor
Fig. 25 Throttle Cable Attachment
(13) Remove EGR tube from intake manifold (Fig.
26).
Fig. 26 EGR Tube and Right Manifold Support Bolt
(14) Remove plenum support bracket bolt located
rearward of EGR tube (Fig. 26).
THROTTLE CABLE
RELEASE TANG
BOLTS TUBE EGR TUBE SUPPORT
JX
BRACKET BOLT