Interlock Mechanism; Manual Valve Lever (Shift Lever); Solenoid Assembly-Replace - Chrysler 1997 Stratus Convertible RHD Service Manual

MOUNTING SCREW
JX
REMOVAL AND INSTALLATION (Continued)
(17) Install screw holding end of instrument panel
top cover. Install fuse panel cover from left end of
instrument panel.
(18) Reconnect the battery negative (-) cable to the
vehicle battery.

INTERLOCK MECHANISM

REMOVAL
(1) Remove the lower column covers, knee bolster
and shrouds. Refer to Interlock Cable Replacement.
(2) Grasp the interlock cable and connector firmly.
Remove the interlock cable.
(3) Remove the two interlock mechanism to steer-
ing column attaching screws (Fig. 21). Remove the
interlock housing.
Fig. 21 Interlock Mechanism
INSTALLATION
(1) Position the interlock housing at steering col-
umn. Install the two interlock mechanism to steering
column attaching screws. Torque screws to 3 N·m (21
in. lbs.).
(2) Snap the interlock cable into the housing.
(3) Install the lower column covers, shrouds and
knee bolster. Refer to Interlock Cable Replacement.

MANUAL VALVE LEVER (SHIFT LEVER)

REMOVAL
(1) Remove shift cable from lever.
(2) Loosen the lever mounting bolt. Do not remove
bolt (not necessary).
(3) Pull up on lever and remove.
INSTALLATION
(1) For installation, reverse removal procedure.
INTERLOCK MECHANISM
INPUT INPUT (TURBINE) SPEED (TURBINE)

SOLENOID ASSEMBLY-REPLACE

SENSOR SPEED SENSOR SOLENOID
Fig. 22 Input Speed Sensor
Fig. 23 Input Speed Sensor Removed
Fig. 24 Sound Cover
ASSEMBLY SOUND COVER SPEED OUTPUT SENSOR
TRANSAXLE 21 - 17