Chrysler 1997 Stratus Convertible RHD Service Manual page 24

2 - 2 SUSPENSION
DESCRIPTION AND OPERATION (Continued)
(4) Toe is measured in degrees or inches and is
the distance that the front edges of the tires are
closer (or farther apart) than the rear edges (Fig. 1).
See Front Wheel Drive Specifications for correct front
and rear wheel Toe specifications.
TOE OUT FRONT TOE LOOSEN NUT TO ADJUST
TOE IN
Fig. 1 Alignment Camber/Toe
(5) Thrust Angle is defined as the average of the
Toe settings on each rear wheel. If this measurement
is out of specification, re-adjust rear wheel Toe so
that each wheel has 1/2 of the total Toe measure-
ment. When re-adjusting, do not exceed the total Toe
specification.
ADJUST TOE TOE NEGATIVE CAMBER POSITIVE
JX