How To Replace The Fuse; Alert And Warning Messages; Alert Messages - Furuno INMARSAT-C FELCOM 18 Operator's Manual

10.6

How to Replace the Fuse

The 15A fuse (for 12 VDC) or 7A fuse (for 24 VDC) in the power cable for the terminal
unit protects the system from overcurrent and reverse polarity. If the fuse blows, find
the cause before replacing it. If the fuse blows again after replacement, contact your
dealer for advice.
12 VDC
Code No.: 000-155-827-10
Type: FGBO-A 125V 15A PBF
10.7

Alert and Warning Messages

This equipment displays alerts and warnings with pop-up messages. The tables which
follow describe the alerts and warnings and the methods to restore normal operation.
If normal operation cannot be restored, contact your dealer for advice.
10.7.1

Alert messages

Alert messages appear in the Alert pop-up, which is colored orange, one message per
pop-up When multiple alerts are generated together, the pop-up windows overlap one
another. To close a pop-up, press the Esc key.
Alert message
When multiple alerts
are generated
together the windows
overlap one another.
An alert message remains in the alert window until the alert condition is resolved. See
subsection 10.7.2.
WARNING
Use the proper fuse.
Use of a wrong fuse can result in fire or damage
the equipment.
24 VDC
Code No.: 000-155-831-10
Type: FGBO 125V 7A PBF
10. MAINTENANCE AND TROUBLESHOOTING
10-7