Data Transfer; Memory Card Operations; Formatting Memory Cards - Furuno COLOR VIDEO PLOTTER 1833C Operator's Manual

6.

DATA TRANSFER

This chapter provides information for saving and replaying data to and from
memory cards, uploading and downloading data, loading waypoint data from
Yeoman, and outputting data through the network.
6.1

Memory Card Operations

The memory cards store these data: marks, lines, waypoints, routes, track, and
setting data.
6.1.1

Formatting memory cards

Before you can use a memory card it must be formatted. This prepares the card
for use with the system. Note that formatting a memory card erases all data from
the card.
1. Insert a blank memory card into the card slot.
2. Press the [MENU] key followed by the SYSTEM CONFIGURATION, DATA
TRANSFER, UPLOAD/DOWNLOAD DATA and SAVE DATA TO MEMORY
CARD soft keys to show the SAVE DATA menu.
3. Press the FORMAT soft key. You are asked if you are ready to format the
memory card.
4. Push the [ENTER] knob to format (or press the [CLEAR] key to escape).
"NOW FORMATTING MEMORY CARD" appears. Do not remove the card
while it is being formatting. When the formatting is completed, "FORMAT
COMPLETED. PUSH ENTER KNOB TO CONTINUE." appears.
5. Push the [ENTER] knob to continue.
Note: If the memory card was not inserted correctly, the message "FAILED TO
FORMAT MEMORY CARD." appears.
TRACKS
MARKS & LINES
WAYPOINTS & ROUTES
SETTING DATA
Save data menu
6. DATA TRANSFER
SAVE
DATA
OFF
OFF
EDIT
OFF
OFF
SAVE
FORMAT
RETURN
6-1