Deleting A Waypoint; Importing Waypoint From Other Routes - Furuno FEA-2107-BB Operator's Manual

13. Route Planning
13.5.6

Deleting a waypoint

To delete a waypoint, do the following:
1. Place the cursor on Route in the status bar then click the Plan button to open the Plan Route dialog box. Click
the WP tab to open the WP page. Check Enable changes.
2. Highlight WP number on WP list that you wish to delete.
3. Click the Delete button.
13.5.7

Importing waypoint from other routes

You are able to choose waypoints from other routes to import them to current route. To import waypoints do the
following:
1. Place the cursor on Route in the status bar then click Plan to open the Plan Route dialog box. Click the WP tab
to open the WP page. Check Enable changes.
2. Click the Import button. The following dialog box appears.
3. In the Copy from window, put the cursor in the Route box, spin the scrollwheel to choose the route from which
to copy waypoints then push the scrollwheel.
4. Enter first waypoint to copy in "First wp to copy". Spin the scrollwheel to choose WP number then push the
scrollwheel.
5. Enter number of waypoints to copy in "Number of wp's". Spin the scrollwheel to choose desired number then
push the scrollwheel.
6. Enter where to import waypoints. To enter them after a WP in a route, enter waypoint number in the "Copy
after wp" box. If you want to enter them before a WP in the route where WPs will be imported, enter waypoint
number in the "Copy before wp" box.
Spin the scrollwheel to choose desired number then push the scrollwheel.
7. Choose copying order, Direct or Reverse. "Direct" copies the waypoints in their original order; "Reverse"
copies them in reverse order. Spin the scrollwheel to choose desired option then push the scrollwheel.
8. Click the Copy button.
9. When finished, click X at top right corner of the dialog box to close the dialog box.
13-14