Keysight N6705 Service Manual page 88

4 Disassembly
88
Figure 4-10
Step 5. Disconnect the four cables from the backplane assembly.
Figure 4-11
Step 6. Remove the top chassis.
Angle the top chassis so you can maneuver around the fin attached to
the rear panel. To completely disconnect the top chassis, unwrap the
front panel cable harnesses from the ferrite cores.
Figure 4-12
Step 7. To install the top chassis, perform steps 1-6 in reverse order. Be
sure to tuck all cables in before replacing the top chassis.
Model N6705 Service Guide