Introduction - Keysight N6705 Service Manual

NOTE
5
1

Introduction

Returning an Instrument .................................................................. 6
Instrument Identification .................................................................. 6
Firmware Upgrade ............................................................................ 7
This manual discusses the verification and calibration procedures for the
Keysight N6705 DC Power Analyzer mainframe.
No procedures are provided for troubleshooting individual modules -
other than identifying if a specific module is defective. If you have a
defective module, you can return it to Keysight Technologies for repair or
replacement. Refer to the following note.
You can contact Keysight Technologies at one of the following telephone
numbers for warranty, service, or technical support information.
In the United States: (800) 829-4444
In Europe: 31 20 547 2111
In Japan: 0120-421-345
Or use our Web link for information on contacting Keysight in your
country or specific location:
Or contact your Keysight Technologies Representative.
The web contains the most up to date version of the manuals. Go to
http://www.keysight.com/find/N6705
manuals.
www.keysight.com/find/assist
to get the latest version of the