Keysight N6705 Service Manual page 87

Disassembly 4
Removing/Installing the Top Chassis
Step 1. Remove the top cover and any modules as previously described.
Step 2. Remove the two side panels.
The handle side requires a T20 driver (see Figure 4-7). The other side
panel requires a Philips pozidrive head (see Figure 4-8). There is also a
screw (T10) that needs to be removed from the rear of each side panel.
Figure 4-7. Right Side Panel
Figure 4-8. Left Side Panel
Step 3. Remove three screws using a T10 driver from the rear panel.
Figure 4-9
Step 4. Remove three screws using a T10 driver from the front panel sub
assembly.
Model N6705 Service Guide 87