Uart0 (Mio 18-19) - Xilinx ZCU111 User Manual

UART0 (MIO 18-19)

[Figure 2-1, callout 7]
This is the primary Zynq UltraScale+ RFSoC PS-side UART interface and is connected to the
FTDI U34 FT4232HL USB-to-Quad-UART bridge port B through TXS0108E level-shifter U21.
The FT4232HL U34 port assignments are listed in
circuit is shown in
Table 3-8: FT4232HL Port Assignments
FT4232HL U34
Port A JTAG
Port B UART0
Port C UART2
Port D UART3
X-Ref Target - Figure 3-5
ZCU111 Board User Guide
UG1271 (v1.1) August 6, 2018
Figure 3-5.
Zynq UltraScale+ RFSoC U1
ZCU111 JTAG chain
PS_UART0 (MIO 18-19)
PL_UART2 bank 64
U42 system controller UART
Figure 3-5: ZCU111 FT4232HL UART Connections
www.xilinx.com
Chapter 3: Board Component Descriptions
Table 3-8. The FT4232HL UART interface
Send Feedback
X20481-062118
34