Rf Rfmc Plug-In Card Interface - Xilinx ZCU111 User Manual

RF RFMC Plug-in Card Interface

Two Samtec LPAF (8x40) connectors provide access to the ADC/DAC clocking and data path
signals. The Samtec part number is LPAF-40-03.0-S-08-2-K-TR. See
Figure 3-20
.
Table 3-20: RF RFMC Plug-in Card Interface
Technical Details
Part number
Series
Number of positions
Lead style
Plating option
Row option
Solder type
Pick and place pad
Tape and reel packaging
X-Ref Target - Figure 3-20
The RFMC LPAF connector pin definitions are shown in
Figure 3-22 (RF-DAC).
ZCU111 Board User Guide
UG1271 (v1.1) August 6, 2018
LPAF-40-03.0-S-08-2-K-TR
LPAF
–40
–03.0 = 3.0 mm
Non-standard option
Contact SAMTEC: –S = 30µ
Selective gold in contact area, matte tin on tail
–08 = eight row
–2 = 95.5% tin/3.8% silver/.7% copper crimp tail
–K - polyamide file pad
–TR = tape and reel packaging
Figure 3-20: SAMTEC Connector
www.xilinx.com
Chapter 3: Board Component Descriptions
Table 3-20
Figure 3-21 (RF-ADC) and
Send Feedback
and
X20540-062118
57