Ps M.2 Sata Connector - Xilinx ZCU111 User Manual

PS M.2 SATA Connector

[Figure 2-1, callout 34]
The M.2 SATA interface is provided for SATA SSD access using the PS-side bank 505 GTR
transceiver. Figure 3-31
The socket 2 SATA adapter pinout with key M is shown in
connection is used for TX and SATA-B for RX. The M.2 connector U40 is a type 2242 (active
component section 22 mm wide with overall length 42 mm form factor) used on socket 2.
X-Ref Target - Figure 3-31
ZCU111 Board User Guide
UG1271 (v1.1) August 6, 2018
shows M.2 connector U40.
Figure 3-31: M.2 Connector U170
www.xilinx.com
Chapter 3: Board Component Descriptions
Table 3-26. SATA-A data
Send Feedback
X20566-062118
75