Run Mode; Normal Operation; Changing The Sub-Display - Omron ZX Series Operation Manual

RUN Mode

4-3

RUN Mode

4-3-1

Normal Operation

The normal measurement process is performed in RUN Mode.
4-3-2

Changing the Sub-display

The sub-display is changed by pressing the RIGHT and LEFT Keys.
n Threshold Display (Default Status)
LEFT Key
112
Set the mode switch to RUN.
The measured value will be displayed
on the main display.
Select the display content for the sub-
display from the thresholds, voltage,
current, incident level, and resolution.
The measured value is displayed on the
main display and the threshold value is
displayed on the sub-display.
The decimal point is displayed.
Either the HIGH or LOW threshold
value is selected using the H/L switch.
The incident level is displayed on the
main display in Intensity Mode (incident
level, 9999 max.).
RIGHT Key
Section 4-3
RUN T FUN
H L