Initializing Controller Settings
Important
The settings of all banks and system settings are initialized regardless of the currently selected
bank No. To save the settings, back them up to a personal computer before performing
initialization.
• Receive System Data < SYSSAVE command > p.144
• Receive Bank Data < BANKSAVE command > p.142
ZG User's Manual
FUN
MEAS
SYS
1. SAVE
2. INIT
3. SENSOR SET
4. CCD MODE
←→
P1/3
SYS/INIT
CLEAR
ALL DATA
YES
NO
1
Switch to the FUN mode.
The top screen is displayed.
2
Select [System].
3
Select [INIT].
4
Move to [YES] and press the SET
key.
Overview of Settings and Measurement
41