New Card With More Ports; Change Slot - Mitel 470 System Manual

Version r4.1; mivoice office 400 series, aastra 470
Hide thumbs Also See for 470:
Table of Contents

Advertisement

Tab. 88
Example: Reducing the number of terminal or network interfaces
16DSI → 8DSI
8BRI → 4BRI
Note:
If the terminal configuration data of system phones is deleted following the reconfiguration of a
card, a warning message will appear beforehand to give you the possibility of cancelling the
process. However, this is possible only if the configuration data of the original card was not
already deleted beforehand.
6. 3. 3. 3

New card with more ports

A card is replaced by a similar card with more ports.
Procedure:
1. Change the card and put the system into operation again. Similar procedure as de-
scribed in "Replacing a defective interface card", page 204.
2. In the WebAdmin view
3. Configure new ports.
The system configuration data (User No., User configuration, etc.) of the terminals on
the new ports is created as new data (default values).
Tab. 89
Example: Expanding the number of terminal or network interfaces
8DSI → 16DSI
4BRI → 8BRI
6. 3. 3. 4

Change slot

Interface cards can be moved to a different slot. The terminal configuration data of the
system phones can be transferred.
Procedure:
1. Change the slot and put the system into operation again. Similar procedure as de-
scribed in "Replacing a defective interface card", page 204.
2. Connect the system phones to the ports of the new slot.
3. Reconfigure the port assignment.
4. In the WebAdmin view
and
Delete
it from the old slot. The configuration data at the old slot location is now
deleted.
Note:
Not all cards can be equipped on all slots (see "Component mounting rules", page 111).
Mitel 470 as of R4.1
syd-0585/1.2 – R4.1 – 08.2016
The configuration data of terminal interfaces 9...16 are deleted.
The configuration data of network interfaces 5...8 are deleted.
Cards and modules
The configuration data of terminal interfaces 9...16 is created as new data.
The configuration data of network interfaces 5...8 is created as new data.
Cards and modules
Operation and Maintenance
(
=4g)
Confirm
the new cards.
(
=4g)
Confirm
card in the new slot
205

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents