Connection Via Main Distribution Board - Mitel 470 System Manual

4. 6. 2. 1

Connection via main distribution board

Fig. 30 Connection via main distribution board
The interface sockets on the front panel and on the fan-out-panel (FOP) where applica-
ble are connected with the (main) distribution frame or the patch panels using either
patch cables or prefabricated system cables (see "Equipment Overview", page 254).
Prefabricated system cable 4 x RJ45
With terminal cards with 16 or more interfaces some or all of the RJ45 sockets are as-
signed four-fold on the front panel of the Mitel 470. With this cable they can be con-
nected without the use of a fan-out-panel (FOP). The cable is 6 m long and at one ex-
tremity has four RJ45 connectors on which all the pins are wired.
Schematic diagram of prefabricated system cable 4 × RJ45 × 8 Pin
Tab. 42
Stranded
Core colour
element
white
blue
1
turquoise
violet
white
orange
2
turquoise
violet
Mitel 470 as of R4.1
syd-0585/1.2 – R4.1 – 08.2016
Communica-
tion server
NT1
NT1
distribution
RJ45
Cable desig-
nation
Pin
4
5
3
6
1
1
2
7
8
(Main)
board
Port
Two-wire connection
x.1a
x.1b
x.2a
x.2b
x.3a
x.3b
x.4a
x.4b
Installation
113