Mitel 470 System Manual page 235

Event message
Temperature within normal
range again
Temporary activation expires
on
Terminal power
supply: Overload (Mitel 470
only)
Terminal power
supply: Shutdown (Mitel 470
only)
Terminal power
supply: Switching back on
(Mitel 470 only)
Terminal power
supply: Within normal range
again (Mitel 470 only)
Test event message
The communication server
has been restarted
The licence limit for BluStar
clients has been reached.
The licence limit for CSTA
sessions has been reached
The licence limit for Dual
Homing has been reached
Mitel 470 as of R4.1
syd-0585/1.2 – R4.1 – 08.2016
Trigger condition
Following overheating, the temperature inside
the communication server is back in the normal
operating range.
Reminder of the missing, definitive activation
licence following connection set-up with the
communication server.
Rated output slightly exceeded for > 4 s.
(see also "Overload shutdown", page 91)
Rated output clearly exceeded for 4 s
(see also "Overload shutdown", page 91)
The power supply to the terminals was switched
back on after deactivation due to overflow.
The power supply to the terminals is back in the
normal rated output range following a slight,
preceding overflow.
The configuration of message destinations can
be tested with this event message.
The communication server was restarted manu-
ally or automatically due to an error.
A BluStar client was unable to register because
there are too few licences for this client type.
Parameter 1: 0 (not used)
Licence type: 0 and 1: (not used), 2: BluStar CTI,
3: BluStar Softphone, 4: BluStar video option,
5: BluStar Presence option
An application is unable to set up a CSTA ses-
sion to monitor/check a terminal because there
are too few CSTA Sessions
A SIP phone in the Mitel 6700 SIP / 6800 SIP
series has attempted to register on a backup
communication server and not enough licences
are available.
Note:
This event message is generated by the backup
communication server.
Operation and Maintenance
Details
Card number, tem-
perature, date, time
Expiration date
[DD.MM.YYYY],
date, time
Date, time
Date, time
Date, time
Date, time
Date, time
Date, time
Parameter 1, licence
type, total purchased
licences, date, time
Max. number of
licences, date, time
licences available.
Date, time
1)
Severity
critical
(positive,
with
match)
Normal
(without
match)
critical
(negative,
with
match)
critical
(negative,
with
match)
critical
(positive,
with
match)
critical
(positive,
with
match)
Serious
(without
match)
Critical
(without
match)
Serious
(negative,
with
match)
Serious
(negative,
with
match)
Serious
(negative,
with
match)
235