Licences; Eim Card - Mitel 470 System Manual

6. 3. 2. 1

Licences

To expand a system already in operation or to re-order a licence for a new system, pro-
ceed as follows:
1. Order the licences you want from your authorised dealer and specify the EID num-
ber, which serves to identify the communication server.
2. The new licence code can be obtained either from your authorized dealer or via
Mitel Connect https://connect.mitel.com
3. Enter the licence code in the
tion server. The licence code is stored on the EIM card.
4. The newly licensed features are enabled. It is not necessary to restart the communi-
cation server (exception: AIN licences).
The data stored on the EIM card is not deleted by a first start of the PBX, and remains
available.
See also:
"Licences", page 70
6. 3. 2. 2

EIM card

The EIM card must be replaced in the following cases:
• A licence is transferred to another communication server
• The call manager card is defective
• The EIM card is defective
A licence is transferred to another system of the same type
A licence can only be transferred to a communication server of the same type. To do so
you need to replace the EIM card with the licence information. For the procedure for
switching an EIM card see page 208.
The call manager card is defective
If a defective call manager card is replaced, the EIM card has to be switched from the
defective call manager card to the new one. For instructions on how to replace the call
manager card, see page 210.
The EIM card is defective
In the unlikely event of a defective EIM card, contact your authorized dealer to discuss
the procedure.
For the procedure for switching an EIM card see page 208.
Mitel 470 as of R4.1
syd-0585/1.2 – R4.1 – 08.2016
using the EID (partner login required).
Licensing ( =q9) view and save it in the communica-
Operation and Maintenance
203