Function Keys For Remote Maintenance Access - Mitel 470 System Manual

The enabling or barring of remote maintenance access using the function code is sig-
nalled in each case by an acknowledgement tone.
Remote maintenance access can also be enabled or barred in WebAdmin, if the rele-
vant authorization has been given.
Note:
In a QSIG network it is important to ensure that the authorization to change the remote mainte-
nance access is also denied to unauthorized PISN users. Otherwise, a PISN user would be
able to use an abbreviated dialling number defined for the destination PINX and containing the
appropriate function code to change the remote maintenance access to the destination PINX.
Mitel Advanced Intelligent Network:
In an AIN the remote maintenance access of all the nodes depends on the setting in the Master.
If remote maintenance access is enabled in the Master, both the AIN configuration and the
offline configuration of the satellites are enabled.
Remote maintenance access via an external dial-up connection to the AIN is also protected and
has to be explicitly enabled via the control panel on the front panel. This is irrespective of
whether dial-up access is via a satellite or directly to the Master.
5. 4. 3

Function keys for remote maintenance access

On system phones the function code for enabling/barring remote maintenance access
can be stored under a function key, provided the user has the appropriate authoriza-
tion.
The relevant LED lights up if remote maintenance access is enabled once or perma-
nently.
The relevant LED goes off as soon as remote maintenance access is denied again, ei-
ther automatically or manually, using the function code or WebAdmin.
Mitel 470 as of R4.1
syd-0585/1.2 – R4.1 – 08.2016
Configuration
187