Mivoice 5361 / 5370 / 5380 - Mitel 470 System Manual

phone display reads
phone is not ready for operation.
Terminal type
The terminal type is specified along with the configuration of the system. Lines are also
assigned to the line keys there.
Note:
If the terminal type configured is incorrect, the system phone display shows the warning
phone type. On the Office 10 the LED flashes slowly. In this situation, although the system
phone can be used for basic telephone operations, none of the added features will be available.
The terminal type must be entered via WebAdmin or on the terminal via login to the system con-
figuration.
Carrying out a logon on the system phone:
– Office 10: : Press the Foxkey twice.
– All other system phones: Long keypress (long click) on a function key.
appears next. Confirm with Foxkey Yes.
4. 8. 6. 2

MiVoice 5361 / 5370 / 5380

These IP system phones can be both desktop-mounted and wall-mounted.
Mounting the phone
The following points are described in detail in the User's Guides for MiVoice 5361 /
5370 / 5380:
• Set-up as a desk phone (choice of two different set-up angles)
• Wall mounting
• Connecting one or more MiVoice M530 or MiVoice M535 expansion key modules.
• Connection of a headset to DHSG standard.
Note:
To prevent any damage to the phone, always disconnect the phone from the power supply
first before connecting a headset to DHSG standard.
Mounting the Bluetooth module
The MiVoice 5380 can also be equipped with a Bluetooth module as an option. To in-
stall (see Fig. 72), proceed as follows:
Mitel 470 as of R4.1
syd-0585/1.2 – R4.1 – 08.2016
No Number and indicates the terminal ID. In this state the system
Installation
Wrong
Set new phone type
163