Mitel 470 System Manual page 237

Event message
TLS certificate update failed
TLS certificate update suc-
cessful
TLS certificate was
generated: Upgrade non-
Mitel endpoints now
Too few FoIP channels
Too few licences for IP sys-
tem phones
Too few licences for PMS
interface
Too few VoIP channel
licences
Too few VoIP channels
Too many errors with the
same ID
Too many event messages
Too much user data
Mitel 470 as of R4.1
syd-0585/1.2 – R4.1 – 08.2016
Trigger condition
The update of the TLS certificate for an SIP
node or SIP endpoint via FTP has failed and
needs to be renewed manually.
If the endpoint type is = 0 (Mitel), then is param-
eter 2 = node ID.
If the endpoint type is = 1 (3rd party), then the
remaining parameter data contains the first
eleven characters of the certificate name.
A TLS certificate for a SIP node or SIP endpoint
was successfully renewed.
If the endpoint type is = 0 (Mitel), then is param-
eter 2 = node ID.
If the endpoint type is = 1 (3rd party), then the
remaining parameter data contains the first
eleven characters of the certificate name.
A TLS certificate has been generated. If genera-
tion is manual, the certificate must be imported
manually into the Mitel SIP nodes. The certifi-
cate must always be imported manually on all
non-Mitel nodes and non-Mitel endpoints.
Setting up a fax connection via T.38 failed
because no FoIP channel is available.
A MiVoice 5361 IP / 5370 IP / 5380 IP was una-
ble to register because there are too few IP sys-
tem phone licences.
Either the Hospitality PMS Interface
missing or the number of
Rooms licences available is insufficient.
Connection setup failed because the licence
limit for simultaneously active VoIP channels
has been reached.
An user is trying to set up a connection that
requires one or more VoIP channels which are
currently not available.
An unusual amount of errors (more than 50 per
hour) with the same error ID have occurred.
Number of message types exceeds limit entered
in the table on:
• "Synch. "Synch.loss on BRI/PRI"
• "Outgoing Call Rejected"
• "No response from network"
System capacity exceeded
Operation and Maintenance
Details
Type of endpoint
(0: Mitel, 1: 3rd
party), node ID or
certificate name,
date, time
Type of endpoint
(0: Mitel, 1: 3rd
party), node ID or
certificate name,
date, time
Date, time
Available FoIP chan-
nels on node
Date, time
licence is Number of licensed
Hospitality PMS rooms, number of
configured rooms,
date, time
No. of licensed VoIP
channels, Date, Time
Available VoIP chan-
nels on this node,
date, time
Error ID, date, time
Date, time
Date, time
1)
Severity
critical
(negative,
with
match)
critical
(positive,
with
match)
Normal
(without
match)
Normal
(without
match)
Serious
(negative,
with
match)
Serious
(negative,
with
match)
Normal
(without
match)
Normal
(without
match)
Normal
(without
match)
Normal
(without
match)
Critical
(without
match)
237