Mitel 470 System Manual page 224

Operation and Maintenance
Event message
CL printer blocked
Compatible PMS application
Configuration template avail-
able
Connection to IP remote
management (SRM) failed
Connection to IP remote
management (SRM) restored
Connection to PMS system
established
Connection to PMS system
failed
CPU2 applications card Data
communication out of service
CPU2 applications card Data
communications back in ser-
vice
Creation instance on backup
communication server failed
224
Trigger condition
• No response from system printer for past 4
minutes
• Printer out of paper or switched off
The external hotel management system (PMS
application) is suitable for communicating with
the communication server.
The missing configuration template for a Mitel
SIP terminal is now available in the communica-
tion server file system.
IP remote management connection set up (SRM
= Secure IP Remote Management) has failed.
Cause parameter:
1: Connection attempt failed, 2: Authentication
failed, 3: File upload rejected
IP remote management connection has been
(SRM = Secure IP Remote Management) suc-
cessfully restored.
A connection with a hotel management system
(PMS system) has now been successfully estab-
lished.
An unsuccessful attempt was made to establish
a connection with a hotel management system
(PMS system).
Reason: 1: Call rejected, 2: Destination unob-
tainable, 3: Destination busy, 4: Connection
timeout, 5: Wrong address, 6: Unknown error
Data communications with the CPU2 applica-
tions card have been interrupted for an unusu-
ally long period of time (> 1 hour) due to an error
(after a Windows update or for other reasons).
Data communications with theCPU2 applica-
tions card have been restored.
The backup communication server was unable
to create or modify a user or terminal instance
with the received configuration data.
Note:
This event message is generated by the backup
communication server.
1)
Details Severity
Interface, inter- Serious
faces/card number, (negative,
port number, date, with
time match)
Date, time critical
(positive,
with
match)
Date, time Serious
(positive,
with
match)
Cause, date, time Normal
(negative,
with
match)
Date, time Normal
(positive,
with
match)
Date, time critical
(positive,
with
match)
Error, date, time critical
(negative,
with
match)
Date, time critical
(negative,
with
match)
Date, time critical
(positive,
with
match)
Instance type critical
(0: User, 1: terminal), (negative,
user number or ter- with
minal ID, date, time match)
Mitel 470 as of R4.1
syd-0585/1.2 – R4.1 – 08.2016