Event Tables - Mitel 470 System Manual

Parameter 1 (XXYY)
Value Reason (XX)
05 Continuous negative answer from
SMTP server
06 Temporary negative answer from
SMTP server
07 No answer from SMTP server
08 E-mail attachment not found
09 Invalid host, domain or IP address on
the communication server
10 E-mail text too long (body)
11 E-mail attachment too large
12 Format of e-mail attachment not sup-
ported
13 No e-mail recipient address
14 Invalid e-mail recipient address
15 Invalid e-mail sender address
1) Action carried out by the SMTP client at the point when the error occurred.
6. 6. 1. 2

Event tables

Event tables ( =f4) list all the event messages the system is capable of generating
(see Tab. ).
There are 7 event tables. After a first start, all event tables are assigned at least one
destination. This assignment can be modified in the
view. Each event table can be configured individually. This means it is possible with a
filter to decide which event message – if any – should be sent to a particular signal
destination either immediately, with a delay or not at all.
• No event:
This type of incoming event messages are never sent to the linked destination.
Mitel 470 as of R4.1
syd-0585/1.2 – R4.1 – 08.2016
Operation and Maintenance
1)
Action (YY)
Transmission of e-mail
recipient address
Prepare data transmis-
sion
Data transmission in
progress
End data transmission
Prepare authentication
(LOGIN)
User name authentica-
tion (LOGIN)
Password authentica-
tion (LOGIN)
Authentication (PLAIN)
Prepare encrypted
authentication (CRAM-
MD5)
Encrypted authentica-
tion (CRAM-MD5)
Preparing to send next
e-mail
Message destinations
Parameter 2: Parameter 3:
Additional info
depending on the
E-mail client
e-mail client
(XXYY)
Call logging for
hospitality
Configuration XX: User ID
files YY: Terminal ID
(( =h1))
239