Password-Free Access; Automatic Exit From The Configuration; Access Log; Remote Access - Mitel 470 System Manual

5. 3. 3

Password-free access

It is possible to activate on the front panel a function that enables via password-free,
local access via LAN with administration right
example if all the passwords have been lost.
There is no password-free access for remote maintenance.
5. 3. 4

Automatic exit from the configuration

Access to the configuration is interrupted if no changes are made to a parameter value
or the navigation system is not used during a specific timeout.
5. 3. 5

Access log

An access log with 20 entries is drawn up for each user account so that the history of
accesses to the configuration can be tracked. Denied access attempts using erroneous
or incorrectly type passwords are also logged. The logs can be read by each user (au-
thorization level) Administrator
Retrieving the log data
The system monitors all the accesses and failed access attempts and saves them in
the file system of the communication server. These lists can be retrieved locally or re-
motely. ( =ez or
CLIP verification
If in the general maintenance settings (
vated, remote maintenance is only possible if the retrieving party is using a CLIP. The
CLIP number is also recorded by the access log.
Entering the processes in the log
Each access attempt generates an entry in the corresponding list.
In case of remote maintenance an entry will not be generated if remote maintenance is
barred or if CLIP required
5. 4

Remote access

With a remote maintenance access the user is authenticated using his user name and
password. The user account must also be assigned an authorization profile in which
the interface access
to SRM (Secure IP Remote Management), secure IP remote management.
Mitel 470 as of R4.1
syd-0585/1.2 – R4.1 – 08.2016
in Expert mode
=z3).
is activated in the configuration and no CLIP is received.
Remote maintenance dial-up access
User access control. This is useful for
required).
=t0) of the parameter
is enabled. This also applies
Configuration
CLIP required is acti-
185