Replacing System Terminals; Dsi System Phones; Dect Terminals - Mitel 470 System Manual

Operation and Maintenance
6. 3. 8

Replacing system terminals

6. 3. 8. 1

DSI system phones

Phones with the same level of added features
Replacing a defective phone
Once the defective DSI system phone has been replaced by an identical phone the ter-
minal configuration data is automatically transferred.
Relocating a phone
The assigned port can be modified in the terminal configuration via WebAdmin, and the
phone connected on the new slot. The terminal configuration data is preserved.
Phones with a different level of added features
If a phone is replaced with another type of phone, most of the terminal configuration
data can be taken over using
ble for the key configuration. Details can be found in the WebAdmin help for the view
Standard terminals
6. 3. 8. 2

DECT terminals

Replacing a radio unit
1. Dismantle the defective radio unit.
2. Fit the new radio unit.
Note:
If the ports of a radio unit are to be changed or if a radio unit is no longer used, it is important to
remove the radio unit in the system configuration. If not, start-up problems may occur when
another radio unit is connected to the same ports.
Replacing a cordless phone (a phone without microSD card)
1. Cancel the registration of the old cordless phone.
2. Register the new cordless phone. The cordless phone data is preserved until the
user number is also deleted.
212
Multi edit. A separate
( =qd).
Multi edit (keys) function is availa-
syd-0585/1.2 – R4.1 – 08.2016
Mitel 470 as of R4.1