Mitel 470 System Manual page 230

Operation and Maintenance
Event message
Mitel SIP terminals within the
licence limit again
Monitor event
No configuration template
No DECT DSP channels
available
No DTMF receiver available
for integrated mobile/exter-
nal phones
No response from network
No response from user
Node: Connection lost
Node: Connection re-estab-
lished
Not enough licences for inte-
grated mobile/external
phones
NTP: Time synchronisation
failed
230
Trigger condition
Mitel SIP Terminals and Mitel 8000i Video
Options licences are now available.
Monitor event
A configuration template for a Mitel SIP terminal
is missing in the communication server file sys-
tem. Without the configuration template, no con-
figuration file can be generated for this terminal
type.
DECT channels on DSP-0x overloaded
A permanent DTMF receiver (for detection suffix
dialling function codes) could not be assigned to
an integrated mobile/external phone with
enhanced functionality.
No answer to Call Setup on BRI-T/PRI interface Port number of the
No answer to incoming DDI call from user on S
bus or DSI
A node is not connected to the Master for a cer-
tain amount of time (configurable).
A node is reconnected with the Master for a cer-
tain amount of time (configurable) after an inter-
ruption.
The connection setup with an integrated
mobile/external phone has failed because the
number of configured mobile/external phones is
greater than the number of licences available.
All the integrated mobile/external phones
remain blocked until a sufficient number of
licences are available.
Time synchronization via the NTP server (NTP =
Network Time Protocol) has failed.
1)
Details Severity
Parameter 1=1: Mitel Serious
SIP Terminals (positive,
licence, Parameter with
2=1: Mitel 8000i match)
Video Options
licence, date, time
Monitor Type, Date, Normal
Time (without
match)
No configuration Serious
template, date, time (negative,
with
match)
Date, time Normal
(without
match)
BCS Ref., date, time Normal
(without
match)
Normal
exchange line circuit, (without
date, time match)
DDI No., date, time Normal
(without
match)
Node number, date, critical
time (negative,
with
match)
Node number, date, critical
time (positive,
with
match)
Number of licences, Serious
number of configured (negative,
mobile/external with
phones, date, time match)
Date, time Serious
(negative,
with
match)
Mitel 470 as of R4.1
syd-0585/1.2 – R4.1 – 08.2016