Page 2
). The information is subject to change without notice and should not be construed in any way as a commitment by MITEL or any of its affiliates or subsidiaries. MITEL and its affiliates and subsidiaries assume no responsibility for any error or omissions in this document.
• The Mitel Networks 6500 Unified Communications Installation and Maintenance Guide. Tip: Use the FCI or Configuration Tool on Mitel OnLine to determine if your hardware is able to support the software upgrade. Note: 6500 Unified Communications Release 4.0 requires a minimum of 768 megabytes (MB) of random access memory (RAM).
Exchange server, and the Domain Controller server on the same 100-megabit network segment for optimum performance. • The 3300 ICP and the 6500 server should be on the same virtual local area network (VLAN). PBX Software Requirements ®...
6500 Unified Messaging System • Provides all of the features that the 6500 Attendant application offers, plus unified messaging. Unified messaging places your e-mails, voice mails, and faxes in one location (Microsoft Exchange 2000 server) and allows you to access and manage these messages anywhere from a telephone or desktop.
Communications Quick Reference Card for Attendant users and Unified Messaging users on the 6500 Unified Messaging system. The cards are available in packages of 25 from Customer Service. Online versions of the cards are available at Mitel OnLine and on the 6500 server. The documents are available in English and French.
Start Here Guide Planning Ahead For the Configuration of the 6500 Server The following table provide values for the 6500 server parameters. Parameters Values Windows NT Local Administrator Password (default is mitel) Administrator PIN (default is 1234567890) User PIN (default is 1234)
Start Here Guide Obtaining the Installation Procedures 1. The paper Installation and Maintenance Guide is supplied with the 6500 Unified Communications software package. You can also obtain this paper Installation and Maintenance Guide (PN 50003280) from Customer Service, or access the .pdf file from Mitel OnLine, or from the 6500 Unified Communications Applications Software Disc 1.
Joined the domain. r Used the Configuration Wizard. r For VPIM networking, configured the 6500 server with the other VPIM servers in the Admin Web Page, and then restarted VPIM Gateway in Service Recovery Manager. r Restarted the server.
Page 10
Logged on to the domain as SpeakAdmin. A separate server for Exchange required the addition of SpeakAdmin to the local admin group. Verified that the Exchange 2000 server can ping the 6500 server by server name and IP address. Checked that the permissions were properly set up for the SpeakAdmin account. Navi- gated into the Exchange Virtual Drive (M:), opened the domain name, MBX, and then SystemMailbox.