User Access Control; User Accounts And Authorization Profiles; User Accounts - Mitel 470 System Manual

Configuration
5. 3

User access control

Access to the configuration is password-protected. Any user wanting to log in to a com-
munication server is prompted for his user name and password (access data).
5. 3. 1

User accounts and authorization profiles

A user's authorizations are regulated by authorization profiles, which are assigned to
the user accounts.
5. 3. 1. 1

User accounts

Default user account for initial access
When a new communication server is opened or after a first start, the default user ac-
count (admin) and several authorization profiles are created. The default user account
is linked with the authorization profile Administrator. This authorization profile is as-
signed the administration rights for the
WebAdmin at the Administrator
The required user accounts and authorization profiles can be set up using the default
user account.
To access the default user account
Tab. 86 Standard user account and standard password
User name
Password
Note:
To prevent unauthorised access to the communication server, it is necessary to modify the
default password during first access. For password selection and input, see "Password syntax",
page 184.
Other predefined user accounts
The predefined default user account
the control panel for the colour display on the front panel. Access is PIN-protected (see
"Call-Manager display and control panel", page 216).
The predefined user account
troller.
The two predefined user accounts
and for a BluStar server.
You can see the predefined user accounts in the
Note:
The predefined user accounts cannot be deleted.
182
User access control
authorisation level.
(Default User
admin
password
SystemUserInterface
MMCC is meant for operating a Mitel Mobile Client Con-
blustar
for
Account) enter the following:
is used to control access via
and bucs are meant for BluStar terminals
User account
Audio services and for
( =a7) view.
Mitel 470 as of R4.1
syd-0585/1.2 – R4.1 – 08.2016