Esp Rate Zonal Run - Beckman Coulter Optima XPN User Manual

Simulations
Using Simulations
6
Select
Transfer
live run. Select
can be run at a later time.

ESP Rate Zonal Run

This function simulates particle separation achieved with rate zonal separation, which is a function
of the sedimentation coefficient and density of the particles, and the viscosity of the gradient
material. Under centrifugal force, particles migrate as zones. Rate zonal separation is time
dependent. ESP simulates the separation of particles as a function of time and radial position.
To create an ESP rate zonal run simulation:
1
On the
The system displays the ESP Rate Zonal Separation page.
Figure 7.6 ESP Rate Zonal Separation Page
2
Select
Rotor
NOTE
For this simulation, only swinging bucket rotors are available.
7-8
to transfer the current simulated run settings to the instrument settings for a
to save the current simulated run settings as a named run program, which
Save
page, select
Simulations ESP Rate Zonal Run
or to select a rotor and labware combination, then select
Labware
.
.
OK
PN B08115AF