Maintenance and Troubleshooting
Retrieving Your Sample in Case of Power Failure
WARNING
When working on the inside of the instrument, be careful not to touch any wires
or circuitry.
5
Determine the instrument's vacuum configuration. There are two possible configurations:
•
Configuration "A"
•
Configuration "B"
Figure
Figure 9.2 Internal Parts — Configuration "A" vents through the port cap
1. Fan Housing
2. Vacuum Vent Port Cap
3. Door Interlock Assembly
9-6
will vent the vacuum through a vent port cap (refer to
will vent the vacuum throught a solenoid release screw (refer to
9.3).
Figure
9.2).
PN B08115AF