Table of Contents
Advertisement
Safety and Notices
Safety Notices
Safety Notices
Before installing, using, or maintaining the instrument, be certain that you know all the following
precautions.
Information
CAUTION
Read all product manuals and consult with Beckman Coulter-trained personnel
before attempting to operate instrument. Do not attempt to perform any
procedure before carefully reading all instructions. Always follow product labeling
and manufacturer's recommendations. If in doubt as to how to proceed in any
situation, contact your Beckman Coulter Representative.
Installation
CAUTION
This instrument is designed to be installed by a Beckman Coulter Field Service
representative. Installation by anyone other than authorized Beckman Coulter
personnel invalidates any warranty covering the instrument. Also, should the
instrument need to be moved, a Beckman Coulter Field Service representative
must reinstall and re-level the instrument in its new location.
WARNING
Do not place the ultracentrifuge near areas containing flammable or combustible
fluids, or any other source of vapors that could enter the ultracentrifuge air
system and be ignited by the motor.
WARNING
Ultracentrifuge operations generate high energy levels that require precautions
against sudden movements that could result from the rare event of a rotor failure.
Maintain a 30-cm. (1-ft.) clearance envelope around and above the
ultracentrifuge. Do not install any equipment or furniture in this envelope. While
the ultracentrifuge is running, keep the envelope clear of any persons or objects
and do not reach into the envelope except when required to change operating
controls.
vi
PN B08115AF
Advertisement
Table of Contents
