Table of Contents
Advertisement
In addition to the Header Bar and the Footer Bar, the Substitute Rotor Run page contains the
following elements:
• The Source Rotor section contains the settings buttons for the original run settings.
— Select the
Library)
the Substitute Rotor Run page.
— To define a source rotor that is not in the catalog, select
minimum and maximum test tube radius in millimeters for the source rotor. The Rotor/
Labware becomes User Defined.
— Select
the Substitute Rotor Run page.
• The Target Rotor section contains the settings buttons for your substitute settings.
— Select the
Library)
return to the Substitute Rotor Run page.
— Select
Substitute Rotor Run page.
— Select
Rotor Run page.
• The
Back
• The
Transfer
a live run.
• The
Save
a later time.
NOTE
Saving or transferring the simulated run settings does not save the simulation inputs, only the
current simulated run settings.
PN B08115AF
button to display the
Rotor/Labware
and select the source rotor and labware of the original run. Select
to enter the speed and time of the original run. Select
Speed/Time
button to display the
Rotor/Labware
and select the source rotor and labware to use for the simulation. Select
to enter the temperature for the simulation. Select
Temperature
to enter the speed for the simulation. Select
Speed
button returns to the
Simulations
button transfers the current simulated run settings to the instrument settings for
button saves the simulated run settings as a named run program, which can be run at
Select Rotor and Labware Page (Catalog/
Rmin/Rmax
Select Rotor and Labware Page (Catalog/
to return to the Substitute
OK
Page.
Functional Pages
Substitute Rotor Run Page
to return to
OK
to enter a custom
to return to
OK
to
OK
to return to the
OK
8-81
8
Advertisement
Table of Contents
