5
To simulate another run, select
6
Select
Transfer
live run. Select
can be run at a later time.
Substitute Rotor Run
This function converts a set of run settings from one type of rotor and labware to another in order
to achieve approximately comparable results and allows conversion of runs from non-Beckman
Coulter equipment (rotors from other manufacturers) to run on the Optima XPN.
To convert a set of run settings:
1
On the
The system displays the Substitute Rotor Run page.
Figure 7.8 Substitute Rotor Run Page
PN B08115AF
Reset
to transfer the current simulated run settings to the instrument settings for a
to save the current simulated run settings as a named run program, which
Save
page, select
Simulations
Substitute Rotor Run
to clear all the parameters that were entered.
.
7
Simulations
Using Simulations
7-11