Beckman Coulter Optima XPN User Manual page 118

Functional Pages
Home Page
The
Set Speed
the current run speed setting in small characters across the bottom. Select the
Display/Button to display the
is active). When you are not on the
Footer Bar.
• The
Set Time
The
Set Time
shows the current run duration setting in small characters across the bottom. Before you begin
a run, the numbers are the same. During a run, the large number counts down to zero.
NOTE
In Hold mode, the time counts up to show the length of time the instrument has been running,
and continues to increment until you select Stop or the maximum run time elapses.
Select the
w²t mode is active). When you are not on the
in the Footer Bar.
• The
Set Temp
The
Set Temp
shows the current temperature setting in small characters across the bottom. Select the
Display/Button to display the
Temp
the
Set Temp
• The Side Menu
The Side Menu must be accessed from the
— If your system requires login, the Login/Logout button. Select this button to log in or out of
the system.
— The Program button. Select this button to display the
— The Run Graph button. Select this button to display the
Data
— The Zonal Mode button. Select this button to display the
The
Vacuum
is in progress, and the action that will be performed if you select the button. The button toggles
between evacuating and venting. Select it before you start a run (after the door is closed) to begin
evacuating and pre-conditioning the chamber. Select it at the end of a run (assuming speed is less
than 3000 rpm and decelerating) to release the vacuum (i.e., vent the chamber).
When you use Zonal mode or Continuous Flow mode, the
replaces the
8-4
Display/Button shows the current rotor speed as a large number and also shows
Set Speed Page
Display/Button.
Display/Button shows the current remaining run time as a large number and also
Display/Button to display the
Set Time
Display/Button.
Display/Button shows the current rotor temperature as a large number and also
Display/Button appears in the Footer Bar.
Page.
Display/Button on the Footer Bar shows the current chamber vacuum of the run that
page.
Home
(or to the Set Speed ω²t Time Page
page, the
Home Set Speed
Set Time Page (Set Speed ω²t Time Page
page, the
Home
Set Temperature Page. When you are not on the
page, and includes the following buttons:
Home
Select Program
Real-Time Run Data/Historical Run
Zonal/Continuous Flow Operation Page
Set Speed
if the w²t mode
Display/Button appears in the
Display/Button appears
Set Time
Home
Page.
Zonal Authorization Page.
PN B08115AF
if the
Set
page,