Directly Connecting A Pc With L2Tp - Teldat -3Ge-USB User Manual

Teldat S.A.
PrerequisitePbk=
PreferredPort=
PreferredDevice=
PreferredBps=0
PreferredHwFlow=0
PreferredProtocol=0
PreferredCompression=0
PreferredSpeaker=0
PreferredMdmProtocol=0
PreviewUserPw=1
PreviewDomain=0
PreviewPhoneNumber=0
ShowDialingProgress=1
ShowMonitorIconInTaskBar=1
CustomAuthKey=-1
AuthRestrictions=288
TypicalAuth=1
IpPrioritizeRemote=1
IpHeaderCompression=0
IpAddress=0.0.0.0
IpDnsAddress=0.0.0.0
IpDns2Address=0.0.0.0
IpWinsAddress=0.0.0.0
IpWins2Address=0.0.0.0
IpAssign=1
IpNameAssign=1
IpFrameSize=0
IpDnsFlags=0
IpNBTFlags=0
TcpWindowSize=0
UseFlags=1
IpSecFlags=0
IpDnsSuffix=
NETCOMPONENTS=
ms_server=0
ms_msclient=0
dni_dne=1
cntx_vpcnets2=1
MEDIA=rastapi
Port=PPPoE5-0
Device=Minipuerto WAN (PPPOE)
DEVICE=PPPoE
PhoneNumber=Teldat-3Ge-PPPoE
AreaCode=
CountryCode=34
CountryID=34
UseDialingRules=0
Comment=
LastSelectedPhone=0
PromoteAlternates=0
TryNextAlternateOnFail=1
Finally, save the file and execute the connection from Start -> Configuration -> Network connections –> Teldat-
3Ge-PPPoE.
The connection will ask you for the mobile network carrier user and password data.

12.4 Directly connecting a PC with L2TP

This shows how to create a connection in a PC, running a Windows operating system, to directly connect the PC to a
Teldat-3Ge-USB through an Ethernet cable.
To the Teldat-3Ge-USB, this must be preconfigured by a DHCP server that has assigned an IP address and the SIM
Teldat-3Ge-USB User Manual
12 Practical Cases
93