Using A Pc As A Tftp Server - Teldat -3Ge-USB User Manual

9 Updating the device firmware

9.2 Using a PC as a TFTP Server

You can also update using a PC as a TFTP server. First, load the fwethant.img file in the directory, which serves as
a file source for the PC's TFTP server. Also, configure the address of the PC TFTP server in the DHCP server router
by running next-server. If the PC address were 172.24.51.49, for a Teldat router, the DHCP configuration command
would be:
subnet teldatsubnet 0 next-server 172.24.51.49
For a Cisco router:
next-server 172.24.51.49
78
Teldat S.A.
Teldat-3Ge-USB User Manual