Using The Router As A Tftp Server - Teldat -3Ge-USB User Manual

Teldat S.A.
Session id 11599 is up, tunnel id 64335
Call serial number is 1278500617
Remote tunnel name is 01.03-EthAnt-00
Internet address is 172.24.78.30
Session is L2TP signalled
Session state is established, time since change 00:00:47
15 Packets sent, 18 received
180 Bytes sent, 328 received
Last clearing of "show vpdn" counters never
Receive packets dropped:
out-of-order:
total:
Send packets dropped:
exceeded session MTU:
total:
Session vcid is 20
Session Layer 2 circuit, type is PPP, name is Virtual-PPP1
Circuit state is UP
Remote session id is 10918, remote tunnel id 48757
DF bit off, ToS reflect disabled, ToS value 0, TTL value 255
No session cookie information available
UDP checksums are disabled
SSS switching enabled
Sequencing is off
Unique ID is 2
%No active PPTP tunnels
You can also check by accessing the Teldat-3Ge-USB monitoring console through telnet and executing the
shomonitor version command.
Check the version through a web access to the device. To do this, execute a client http (web browser) in a computer
on the address the DHCP assigned to the Teldat-3Ge-USB. (http://172.24.78.28 in the example.)
The STATUS LED lights up in steady YELLOW during the application updating.
There are two basic updating methods, explained in the following paragraphs.

9.1 Using the router as a TFTP server

The first steps to carry out in the corporate router are:
• For a Teldat router, save the firmware file through FTP.
• For a Cisco router, use TFTP.
• Enable the TFTP server in both types of router.
The sequence of commands to use in a Teldat router is as follows:
feature tftp
-- TFTP user configuration --
server file-system DSK
server enable
exit
The sequence of commands to use in a Cisco router is as follows:
access-list 2 permit any
tftp-server flash:fwethant.img 2
You can also modify the access list so that only this is authorized to download the fwethant.img file from a source
address, which is the Teldat-3Ge-USB.
Teldat-3Ge-USB User Manual
0
0
0
0
9 Updating the device firmware
77