Showconfig - Teldat -3Ge-USB User Manual

7 Monitoring the device via Telnet
Enter a command>changepw
Changing password for monitor
Old password:
New password:
• Repeat the new password:
Enter a command>changepw
Changing password for monitor
Old password:
New password:
Retype password:
Password for monitor changed by monitor

7.2.2 showconfig

Displays the device configuration. This command has no associated parameters.
The configuration parameters are immediately displayed when you execute this command:
Enter a command>showconfig
#Teldat-3Ge configuration file
# apn string
apn=internet.es
# SIM pin number
# This value is not show on text file format for security reasons
pin=
# web access password
# This value is not show on text file format for security reasons
webpassword=
# telnet access enable by default (enable, disable)
telnetaccess=
# router type teldat by default (generic, teldat)
routertype=
# Asynchronous Control Character Map
accm=
# AT command to send before the PIN
atbeforepin=
# AT command to send after the PIN
atafterpin=
# Number of packets to send without answer.
# flowcontrol=no to disable
flowcontrol=20
# Number of seconds waiting for a packet answer.
# rxtimeout=no to disable
rxtimeout=60
# Number of seconds between samples of WWAN monitorization.
# coveragetimer=no to disable
coveragetimer=10
# SIP port
sipport=5060
# SIP local phone number
localphone=915555555
# SIP server
sipserver=
# NTP server
ntpserver=
# NTP interval in seconds
ntpinterval=3600
# Timezone
timezone=CET-1CEST,M3.5.0/2,M10.5.0/3
# DHCP sends client identifier.
# clientid=no to disable
clientid=no
# VLAN ID
vlanid=
# VLAN ethernet subinterface IP address
50
Teldat S.A.
Teldat-3Ge-USB User Manual