Teldat -3Ge-USB User Manual page 89

Teldat S.A.
Upgrading Boot file
Starting firmware upgrade....
Reseting 3G module
Upgrading to version F1_2_3_15BT C:/WS/FW/F1_2_3_15BT/MSM7200R3/SRC/AMSS 2008/07/09 10:06:20
Firmware size 622640 bytes
Upgrading: 100%
Reseting 3G module
Upgrading Main Application file
Starting firmware upgrade.....
Reseting 3G module
Upgrading to version F1_2_3_15AP C:/WS/FW/F1_2_3_15AP/MSM7200R3/SRC/AMSS 2008/07/09 13:02:11
Firmware size 18671680 bytes
Upgrading: 10%
Once the APP downloading has finished, reaching 100%, the 3G module resets:
Enter a command>wwanupgrade boot_1.2.3.15.cwe app_1.2.3.15.cwe
Upgrading Boot file
Starting firmware upgrade.....
Reseting 3G module
Upgrading to version F1_2_3_15BT C:/WS/FW/F1_2_3_15BT/MSM7200R3/SRC/AMSS 2008/07/09 10:06:20
Firmware size 622640 bytes
Upgrading: 100%
Reseting 3G module
Upgrading Main Application file
Starting firmware upgrade.....
Reseting 3G module
Upgrading to version F1_2_3_15AP C:/WS/FW/F1_2_3_15AP/MSM7200R3/SRC/AMSS 2008/07/09 13:02:11
Firmware size 18671680 bytes
Upgrading: 100%
Reseting 3G module
If this has been successful, a message will appear confirming the downloading is complete:
Enter a command>wwanupgrade boot_1.2.3.15.cwe app_1.2.3.15.cwe
Upgrading Boot file
Starting firmware upgrade.....
Reseting 3G module
Upgrading to version F1_2_3_15BT C:/WS/FW/F1_2_3_15BT/MSM7200R3/SRC/AMSS 2008/07/09 10:06:20
Firmware size 622640 bytes
Upgrading: 100%
Reseting 3G module
Upgrading Main Application file
Starting firmware upgrade.....
Reseting 3G module
Upgrading to version F1_2_3_15AP C:/WS/FW/F1_2_3_15AP/MSM7200R3/SRC/AMSS 2008/07/09 13:02:11
Firmware size 18671680 bytes
Upgrading: 100%
Reseting 3G module
Firmware upgrade done
Enter a command>
If an error is produced during the teleloading process, the application displays a message on the console screen de-
scribing the cause. If the failure occurs after the first 3G module reset, the Teldat-3Ge-USB restarts to leave the 3G
in an operating mode. Once the Teldat-3Ge-USB has restarted, try loading the firmware again.
If you only complete the downloading of the BOOT file, the module might not be able to start the old APP main ap-
plication. Repeat the downloading process (until successful) so the 3G module can operate again.
It's advisable to analysis the cause of the error and solve it before trying to reload again as the causes could be:
there is no access to the TFTP server entered as the wwanupgrade argument; some of the files are not available in
the TFTP server; or some of the files you are trying to download are not compatible with the 3G module the Teldat-
3Ge-USB has.
Teldat-3Ge-USB User Manual
11 Upgrading the 3G module firmware
83