Commands To Update The Device Firmware - Teldat -3Ge-USB User Manual

Teldat S.A.
** Signal quality **
CSQ: 16
Level: ###----
** Last events **
Nov 29 17:00:17 WWAN: atinitialcfg: Teldat mode, unable to configure WWAN
Nov 29 17:00:19 WWAN: atgsm: Unable to activate unsolicited result codes
Sep 19 02:42:19 WWAN: atinitialcfg: Generic mode
Sep 19 02:42:21 WWAN: atinitialcfg: There is a SIM
Sep 19 02:42:21 WWAN: atinitialcfg: Restarting the modem
Sep 19 02:42:25 WWAN: atinitialcfg: PIN ready
Sep 19 02:42:25 WWAN: atinitialcfg: Setting Context
Sep 19 02:42:26 WWAN: atinitialcfg: Context established
Sep 19 02:42:27 WWAN: atinitialcfg: Not registered in WWAN yet. Status: 2 Searching
Sep 19 02:42:27 WWAN: atgsm: Configuring GSM voice interface
Sep 19 02:42:30 WWAN: atgsm: Voice interface configured
Sep 19 02:42:37 WWAN: atcall: Connect
Enter a command>
• showmonitor cell:
Enter a command>showmonitor cell
** Serving cell info **
Location Area Code: 0B2E
PLMN:
LAC:
CellID: 12582
BSIC:
NCC:
BSCC:
RAC:
MinRxLvlRqd:
MaxRach:
ARFCN:
Status: 2 Service
Domain: 2 Packet-switched
Roaming: 0 No roaming
Mode: 5 WCDMA
SIM: 1 Available
Received Signal Code Power (RSCP) from -120 dBm to -20 dBm:
Total Energy per Chip per Power Density (EcIo) from -31.5 dB to 0 dB:
Last EcIo measured in WCDMA DATA mode: -4
Network Technology in use:
Available Technologies:
** Neighbour cells info **
Band:
ARFCN:
RAC:
RXlevel(dBm):
C1:
C2:
C31:
C32:
Enter a command>

7.5 Commands to Update the Device Firmware

The updating commands are as follows:
---------------------------------------------------------------------------
downloadapp
---------------------------------------------------------------------------
Teldat-3Ge-USB User Manual
21407
2862
0
0
0
0
-110
NotAvailable
NotAvailable
HSDPA/HSUPA
UMTS,HSDPA/HSUPA
showupdate
-80 dBm
-5.0 dB
uptimehours
7 Monitoring the device via Telnet
57