Configuring Video And Audio Settings; Configuring Video Settings - HIKVISION DS-2DY9250IAX-A User Manual

Configuring Video and Audio Settings

6.1.1 Configuring Video Settings

Steps:
1. Enter the Video settings interface:
Configuration > Video/Audio > Video
2. Select the Stream Type of the camera to Main Stream (Normal), Sub-stream or Third Stream.
The main stream is usually for recording and live viewing with good bandwidth, and the
sub-stream can be used for live viewing when the bandwidth is limited. Refer to the Section
4.2 Configuring Local Parameters for switching the main stream and sub-stream for live
viewing.
3. You can customize the following parameters for the selected stream.
Note:
The parameters vary depending on different camera models.

Video Type:
Select the stream type to video stream, or video & audio composite stream. The audio signal
will be recorded only when the Video Type is Video & Audio.

Resolution:
Select the resolution of the video output.

Bitrate Type:
Select the bitrate type to constant or variable.

Video Quality:
© Hikvision
Figure 6-23 Configure Video Settings