Smart Event; Set Intrusion Detection - HIKVISION DS-2XC6745G0-IZHS User Manual

The metadata of face capture includes the rule information, target ID, target coordinate, time
information, etc. The camera detects the whole image by default. If the area is configured in the
face capture settings, the camera detects the configured area.

10.3 Smart Event

Note
For certain device models, you need to enable the smart event function on VCA page first to
●
show the function configuration page.
The function varies according to different models.
●

10.3.1 Set Intrusion Detection

It is used to detect objects entering and loitering in a predefined virtual region. If it occurs, the
device can take linkage actions.
Before You Start
Go to VCA and select the application. Select Smart Event and click Next to enable the function.
●
For the device supporting HEOP, go to VCA to import and enable Smart Event.
●
Steps
1. Go to VCA → Set Application → Smart Event → Intrusion Detection .
2. Check Enable.
3. Click Add to add a rule and set a detection area.
1) Draw a detection area. Click
boundaries of the detection area, and right click to complete drawing.
2) Set the minimum size and the maximum size for the target to improve detection accuracy.
Only targets whose size are between the maximum size and the minimum size trigger the
detection. Click
maximum target size.
3) Optional: Click
4. Set parameters.
Detection Target
This function allows alarm triggering by specified selected target types. If the detection target
is not selected, all the detected targets will be reported.
Note
This function is only available for certain device models under certain settings. Please refer to
the actual settings.
Threshold
Network Camera User Manual
, click on the live view to specify the vertexes and draw the
and , then drag the mouse in the live view to draw the minimum and
to delete all the setting areas.
76