Set Picture Composition - HIKVISION iDS-TCV500-B(I)/IM User Manual

– Select Time Schedule when you want the supplement light to be enabled during a fixed time
period. Set the start time and end time.
– Select Environment Brightness when you want the supplement light to be controlled by
detecting the surroundings brightness automatically. Set the brightness threshold. The higher
the threshold is, the harder the supplement light can be enabled.
Note
The modes conflict with each other. You can only enable one mode.
4. Optional: Check other I/O(s) to copy the same settings.
5. Click Save.

3.2.3 Set Picture Composition

You can enable the picture composition to composite several pictures into one to make it
convenient to view the violation captured pictures.
Steps
1. Go to Configuration → Capture → Capture Parameters → Image Encoding and Composition →
Image Composition.
2. Check Enable Composition.
3. Set composition types for different picture quantities.
4. Set other composition parameters.
Close-up Zooming Ratio
The higher the value is, the larger the close-up is.
Close-up Picture No.
It is the picture where the close-up comes from.
Plate Close-up Offset
The default value is 0, which is recommended to be adopted. The device can capture close-up
pictures according to the set offset when no license plate is recognized.
5. Optional: Check Output Close-up Independently to output close-up pictures independently
when the picture composition is not enabled.
Tyre and Axle Recognition Unit User Manual
Figure 3-4 Set Picture Composition
8