Attachment Of Bushing Presser B; Attachment Of Upper Shaft Bushing - Brother CE-5500PRW Service Manual

Application of Assembly
5

Attachment of Bushing presser B

1. Insert the "washer, thrust 2" and the lower shaft bushing 3 into the lower
shaft assy. 1.
2. Set the bushing presser B 4 to the base plate assy. with the 3 screws 1.
3. Insert the "washer, thrust 5" into the lower shaft assy. 1, and then attach
the retaining ring E6.
4. Sandwich the lower shaft bushing 3 with the retaining ring E6 and the set
collar 6 and then tighten the 2 screws 2.
*Key point
• Check that the lower shaft assy. 1 is not a wobble, and it
moves smoothly.
Lubricate the lower shaft bushing round surface
with FBK OIL RO 100.
Apply MOLYKOTE EM30L to all of the teeth
around the lower shaft gear.
1
2
6

Attachment of Upper shaft bushing

1. Insert the upper shaft bushing 2 into the lower shaft assy. 1, and then
attach the retaining ring E6.
Lubricate the upper shaft bushing with the OILER.
3 - 70
Feed and rotary module
Taptite, Bind B
M3X6
Set Screw, Socket (CP)
M4X4
1-2 drops
XC8388***
Small amount
XC8385***
Torque
0.39 – 0.78 N·m
Torque
0.78 – 1.18 N·m
1-2 drops
XZ0206***
2 1
3
1 5
Retaining ring E6
2 3 6
1 Retaining ring E6
4
1
2
2