Menu System; Bluetooth Association - Ingenico IWL200 series User Manual

Terminal User Guide

Menu System

When you press the menu key from the idle screen your terminal will
enter the menu system. All the menu screens have the same layout. To
select an option press the F1, F2, F3, or F4 keys as indicated on the
screen.
When navigating around the menu structure: by pressing the menu key
you will move to the next menu screen (if available); by pressing the
cancel key you will move back to the last menu screen (if available), or
return to the idle screen.
A schematic of the whole menu structure is found in the section entitled
Menu Structure.

Bluetooth Association

Bluetooth terminals will be supplied already paired with the base unit
provided; your terminal can only use the telephone and Ethernet
connections when it is paired to the base unit.
To associate your terminal to a Bluetooth base, press the menu key
twice, then choose
asked to type your current supervisor password, and confirm this by
pressing the enter key. Press the menu key and choose
pressing the F1 key, followed by the
 MENU, MENU, F3, [password], ENTER, MENU, F1, F4
You can then use the up, down and enter keys to select the desired
option:
NEW BASE
SELECT BASE
REMOVE BASE
PRINT BASES
SUPERVISOR
Pair your terminal to a new base unit.
Select base unit from list of paired bases units.
Remove the association with an old base unit.
Print a confirmation of paired base units.
Bluetooth terminals can only be paired with a compatible
Bluetooth base unit that is powered on.
by pressing the F3 key. You will be
BLUETOOTH
by pressing the F4 key.
Your Terminal
SHORT CUT
by
15