System Configuration Menu
Overview
3.1
This chapter explains how to perform the functions in the system configuration menu: change
date and time, set display contrast, and adjust beep tones (length and tone).
Changing the Date and Time
3.2
Display
Extended Menu
Serialnum Inject
System Config
System Info
Supervisor Menu
System Config
System Date/Time
Display Contrast
Enter Date
YYYY/MM/DD
2003/08/22
Enter Time
HH:MM
17:21
Ingenico 6500 User's Guide
C h a p t e r 3
Action
To access the extended menu, restart the terminal
by pressing [1] + [CAN] + [OK]; while the terminal
is starting up, access the extended menu by
pressing the [1] and [3] keys simultaneously.
Press [ ], [Enter] to select System Config.
Press [Enter] to select System Date/Time.
Key the new date using the format YYYYMMDD,
then press [Enter]. To bypass, press [Enter].
Key the new time using the format, HHMM, then
press [Enter]. The system uses a 24-hour clock.
To bypass, press [Enter].
11