Reports
To perform a Banking report for ALL acquirers press the menu key
twice, then choose
to type your supervisor password, then press enter, choose
pressing the F2 key, followed by the F1 key to choose
MENU, MENU, F1, [password], ENTER, F2, F1
To perform a Banking report for a SINGLE acquirer press the menu key
twice, then choose
to type your supervisor password, then press enter, choose
pressing the F2 key, followed by the F4 key to choose
repeatedly for
by pressing enter.
MENU, MENU, F1, [password], ENTER, F2, F4
68
REPORTS
REPORTS
NEXT
until the acquirer required is displayed, select this
The Banking report is a constitutional part of the End of Day
Report. If you do an End of Day report then you do not need to
perform a separate Banking report.
If you do not complete an End of Day report (or the Banking and
Z Balance separately), money may not be collected from the
customer and will lead to a delay in you receiving funds.
by pressing the F1 key. You will be asked
by pressing the F1 key. You will be asked
Terminal User Guide
BANKING
by
ALL
.
BANKING
by
SINGLE
. Press F4